home *** CD-ROM | disk | FTP | other *** search
-
- NOVELL TECHNICAL INFORMATION DOCUMENT
-
- TITLE: NetWare Client 2.1 for OS/2
- DOCUMENT ID: TID020746
- DOCUMENT REVISION: A
- DATE: 20APR94
- ALERT STATUS: Yellow
- INFORMATION TYPE: Issue
- README FOR: WSOS22.EXE
-
- NOVELL PRODUCT and VERSION:
- NetWare Client for OS/2 2.10
-
- ABSTRACT:
-
- The complete product consists of the following five files: (WSOS21.EXE)
- contains the installation program, (WSOS22.EXE) contains the requester and
- RIPL files, (WSDRV1.EXE) contains the LAN drivers, (OS2UT1.EXE) contains
- LOGIN, NLIST, MAP, CX, SYSCON utilities, and (OS2DC1.EXE) contains the
- electronic documentation in OS/2 IPF format.
-
- ──────────────────────────────────────────────────────────────────────────────
- DISCLAIMER
- THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL
- MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE
- INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL
- MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
- ──────────────────────────────────────────────────────────────────────────────
-
- ISSUE
-
- This product contains the following enhancements:
-
- * Support for Remote Boot (RIPL)
- * Private and global DOS/MS Windows support
- * IPX/SPX support for enhanced mode MS Windows applications
- * Automated ODINSUP setup
- * Documentation in native OS/2 format (costs less to download and runs
- with the OS/2 book display program already on your system)
-
- The NetWare Client version 2.1 for OS/2 electronic documentation is now
- available in native OS/2 format. Because the native OS/2 formatting does
- not require much disk space, the documentation is now available as a
- standard part of the client kit download rather than as a separate
- download from NetWire.
-
- Self-Extracting File Name: WSOS22.EXE Revision: A
-
- Files Included Size Date Time
-
- \
- WSOS22.TXT (This File)
- WSOS2_2 11218 04-14-94 1:34p
- \REQUESTR\
- IPX.SY_ 7045 01-24-94 2:09p
- LSL.SY_ 6600 03-23-94 10:29a
- SPX.SY_ 10207 04-08-94 10:53a
- TLI.DL_ 9931 12-13-93 12:59p
- NETX.EX_ 47104 04-14-94 11:44a
- VIPX.SY_ 14700 04-08-94 1:22p
- NWAFP.DL_ 3353 08-30-91 11:07a
- NWIFS.IF_ 26359 04-05-94 4:59p
- NWNET.DL_ 95604 03-01-94 4:37p
- NWREQ.SY_ 18372 04-05-94 4:45p
- NETAPI.DL_ 1041 10-08-92 12:26p
- NETSUB.DL_ 1039 10-08-92 12:26p
- NMPIPE.SY_ 9100 03-08-94 1:26p
- NWPSRV.DL_ 92569 03-01-94 4:48p
- TSAOS2.EX_ 44763 04-06-94 2:15p
- VSHELL.SY_ 8687 04-08-94 2:07p
- DDAEMON.EX_ 6827 03-01-94 11:43a
- DOSVIPX.SY_ 4729 03-01-94 11:53a
- NETBIOS.EX_ 13531 11-19-93 11:05a
- NETBIOS.SY_ 14654 04-01-94 9:26a
- NPCALLS.DL_ 1406 10-08-93 11:45a
- NWTOOLS.EX_ 81306 04-07-94 5:23p
- TLI_SPX.DL_ 31992 12-13-93 1:08p
- TLI_TCP.DL_ 6395 04-19-93 12:00p
- IPXCALLS.DL_ 1201 07-19-93 3:04p
- NBDAEMON.EX_ 2443 11-05-93 11:36a
- NPDAEMON.EX_ 10203 03-22-94 2:53p
- NPSERVER.SY_ 7015 03-22-94 3:00p
- NWCONFIG.DL_ 2685 02-08-94 7:42p
- NWDAEMON.EX_ 21458 03-02-94 11:18a
- NWOS2DOC.IC_ 367 02-08-94 2:16p
- NWWORKER.DL_ 32573 03-09-94 4:37p
- SPDAEMON.EX_ 4642 12-14-93 12:48p
- SPXCALLS.DL_ 1187 12-14-93 12:47p
- \RPL\
- NE2.200 10317 08-23-93 3:19p
- RPL.NLM 6269 02-04-94 4:55p
- MINI.IFS 8641 02-15-94 1:36p
- ETHER.RPL 16630 12-28-93 3:34p
- F1ETH.RPL 12499 12-28-93 3:36p
- MICRO.IFS 1005 08-13-93 3:56p
- PCN2L.RPL 11357 12-28-93 3:41p
- RBOOT.RPL 7587 12-28-93 3:45p
- TOKEN.RPL 17316 12-28-93 3:48p
- NE1000.200 10985 08-23-93 3:16p
- NE2000.200 11444 08-23-93 3:18p
- RPLOS2.200 3598 08-13-93 3:29p
- \WINDOWS\
- TBMI2.CO_ 9052 01-06-94 11:55a
- NETAPI.DL_ 3146 06-24-91 11:05a
- NETWARE.DR_ 50291 10-27-92 7:38a
- NETWARE.HL_ 16115 02-12-92 3:12p
- NWPOPUP.EX_ 2335 10-28-93 8:06a
- NWIPXSPX.DL_ 15448 02-28-94 4:01p
- NWNETAPI.DL_ 51682 01-07-93 1:31p
-
- Installation Instructions:
-
- NetWare Client 2.1 for OS/2. This client product supports all OS/2 2.x
- releases made before April 15, 1994 and replaces all previous 2.x
- versions of the NetWare Client for OS/2.
-
- NOTE: If you have OS/2 1.3, you need to obtain the NetWare Requester 1.3
- for OS/2 instead of this product.
-
- INSTALL INSTRUCTIONS for the NetWare Client 2.1 for OS/2
-
- The NetWare Client 2.1 for OS/2 consists of five self-extracting files:
-
- WSOS21.EXE contains the installation program.
- WSOS22.EXE contains the requester and RIPL files.
- WSDRV1.EXE contains the LAN drivers.
- OS2UT1.EXE contains LOGIN, NLIST, MAP, CX, SYSCON utilities.
- OS2DC1.EXE contains the electronic documentation in OS/2 IPF format.
-
-
- After these files are downloaded, there are three methods that can be
- used to complete the installation of the NetWare Client 2.1 for OS/2:
-
- Method 1: Extract to Network Drive/Install from Network Drive
-
- Method 2: Extract to Diskettes/Install From Diskettes
-
- Method 3: Extract to Hard Disk/Make Diskettes/Install From Diskettes
-
- Instructions for each method follow.
-
- *********
- Method 1: Extract to Network Drive/Install from Network Drive
-
- NOTE: You must have a version of the Netware Client already installed on
- your workstation and be connected to the Network to use this INSTALL
- method. You cannot install to and from the same drive.
-
- Example:
-
- You cannot install from C: to C:
-
- 1. To install the NetWare Client to your hard disk, you must have
- adequate disk space to allow for the client to install (about 4 MB).
-
- 2. At the Network drive, create a directory called TEMP. This
- directory can be deleted later.
-
- Example: At the J:\ prompt, type the following command:
-
- MD TEMP
-
- 3. Extract WSOS21.EXE, WSOS22.EXE, WSDRV1.EXE, OS2UT1.EXE, and
- OS2DC1.EXE into the TEMP directory using the -d option to create the
- required subdirectories.
-
- Example: At the command line, type the following command:
-
- WSOS21 -d J:\TEMP
-
- 4. In an OS/2 Command Line Session, CD into the TEMP directory and type
- INSTALL. The NetWare Client for OS/2 Installation screen will
- appear.
-
- Follow the instructions that appear on the screen to install the
- NetWare Requester on the workstation.
-
- NOTE: Make sure and place the local disk drive letter as the target
- directory.
-
- 5. Delete your TEMP directory if desired.
-
-
- ********************
- Method 2: Extract to Diskettes/Install From Diskettes
-
- 1. Format 5 3.5" high density double-sided diskettes.
-
- 2. Label each diskette with the following names:
- Disk 1 WSOS2_1
- Disk 2 WSOS2_2
- Disk 3 WSDRV_1
- Disk 4 OS2UTIL_1
- Disk 5 OS2DOC_1
-
- Example: At the command line, type the following command:
-
- Label A: WSOS2_1
-
- 3. Extract the .EXE files to their corresponding diskettes using the -d
- option. WSOS21.EXE into WSOS2_1, WSOS22.EXE into WSOS2_2, etc.
-
- The -d option will create the required subdirectory structure and
- will allow the INSTALL program to run correctly.
-
- Example: At the command line, type the following command:
-
- WSOS21 -d A:
-
- 4. After creating the five diskettes, insert WSOS2_1 diskette in drive
- A.
-
- 5. Open the drive A: icon on your desktop and open the INSTALL.EXE
- program.
-
- The NetWare Client for OS/2 install screen appears.
-
- 6. Follow the instructions on the screen or in the manual to complete
- the install.
-
- ******************
- Method 3: Extract to Hard Disk/Make Diskettes/Install From Diskettes
-
- 1. Create the following subdirectories on your hard disk:
-
- WSOS2_1, WSOS2_2, and WSDRV_1, OS2UT_1, and OS2DC_1
-
- Example: At the C:\ prompt, type the following command:
-
- MD WSOS2_1
-
- 2. Extract the .EXE files into their corresponding subdirectories using
- the -d option. WSOS21.EXE into WSOS2_1, WSOS22.EXE into WSOS2_2,
- and so forth.
-
- Example: At the command line, type the following command:
-
- WSOS21 -d C:\WSOS2_1
-
- 3. Format 5 3.5" high density double-sided diskettes.
-
- 4. Label each diskette with the following names:
-
- Disk 1 WSOS2_1
- Disk 2 WSOS2_2
- Disk 3 WSDRV_1
- Disk 4 OS2UTIL_1
- Disk 5 OS2DOC_1
-
- Example: At the command line, type the following command:
-
- Label A: WSOS2_1
-
- 5. Insert diskette labelled WSOS2_1 into drive A:.
-
- 6. Change directory to WSOS2_1 on your hard disk.
-
- 7. Type the following at the command line:
-
- XCOPY *.* /S /E /V A:
-
- 8. Repeat steps 6 and 7 for the remaining 4 diskettes. Ensure that the
- files are copied from the correct directory to the corresponding
- labelled diskettes.
-
- 9. After creating the 5 diskettes, insert WSOS2_1 diskette in drive A.
-
- 10. Open the drive A: icon on your desktop and open the INSTALL.EXE
- program. The NetWare Client for OS/2 install screen appears.
-
- 11. Follow the instructions on the screen or in the manual to complete
- the install.
-
- ────────────────────────────────────────────────────────────────
- Any trademarks referenced in this document are the property of their
- respective owners. Consult your product manuals for complete trademark
- information.
- ────────────────────────────────────────────────────────────────
-
-
-
-
-